LePresso Latteo Hot & Cold Brewing Coffee Machine with Milk Frothing Function - Silver
ePresso Latteo – Technical / Technician-Oriented Overview
Model Identification
Model: LePresso Latteo Hot & Cold Brewing Coffee Machine
SKU: LPCFFTEM0071-SL
Finish: Silver
Plug: UK 3-pin, includes cord
Intended Regions: 220–240 V, 50/60 Hz mains supply
Electrical & Power System
Rated Voltage: 220–240 V AC
Rated Frequency: 50/60 Hz
Total Input Power: 1350 W (boiler/heating load)
Electrical Protection: Standard UK 3-pin fused plug configuration
Thermal Considerations: Boiler and heating block engineered for rapid heat-up and stable brewing temperature; adequate ventilation required in confined installations
Hydraulics & Pressure System
Pump Output: 20 BAR maximum pressure
Designed for high-pressure extraction typical of espresso-style brewing.
Pressure ideally suited to force hot water through fine grounds for crema formation.
Water Path: Internal plumbing rated for sustained pressure use; routine descaling recommended to maintain flow rate and pump longevity.
Boiler & Thermal Management
Boiler Type: Integrated high-efficiency boiler
Heat Delivery: Rapid warm-up to extraction temperature; consistent temperature control intended for repeated cycles.
Cold Brewing Capability: While nomenclature includes “cold brewing,” this refers to capability to brew cold coffee using chilled water; the system still uses pressure to extract flavor over short cycles rather than long cold-brew immersion.
Reservoirs & Fluid Capacities
Water Tank Capacity: 1.2 L removable reservoir
Milk Tank Capacity: 1.0 L dedicated milk reservoir for frothing
Reservoir Systems: Designed for easy fill/clean; milk circuit incorporates dedicated milk line and frothing assembly.
Avoid overfill beyond marked maxima to prevent pump cavitation or milk path clogging.
User Interface & Controls
Control Type: Capacitive touch panel
Intuitive input surface with direct command for brewing modes and steam/froth functions.
Indicators: Likely includes status LEDs for heating readiness and cleaning cycles (details in manual).
Brewing Modes: Multiple pre-set selections for hot espresso, long black, latte, iced drink profiles, etc. Exact mode list in user documentation.
Milk Frothing Module
Frothing System: Integrated milk frother using internal steam system
Designed to generate microfoam for lattes, cappuccinos without external steamer.
Milk Path: Separate tank and tubing; periodic cleaning recommended to avoid protein buildup and bacterial growth.
Froth Control: Activated through dedicated function on touch panel.
Self-Cleaning Function
Auto Maintenance: Built-in self-cleaning cycle
Likely flushes heating circuit and frother path on command to reduce manual descaling frequency.
The cleaning routine helps maintain consistent brewing temperatures and prevents milk residue buildup.
Structural / Mechanical Layout
Chassis: Silver finish housing with integrated boiler assembly, pump, reservoir interfaces, and control board.
Dimensions: Approximately 320 × 215 × 315 mm (varies slightly based on report)
Weight: Approx. 4.1 kg (indicative)
Maintenance & Technician Notes
Descale Frequency: Dependent on local water hardness; recommended periodic descaling to protect heating element and pump.
Milk Circuit Sanitization: Disassemble and flush milk lines after use to prevent clogging.
Pressure System: Regularly test pressure pump output and seal integrity; replace seals if leaks are observed.
Electrical Safety: Ensure correct grounding and fuse ratings per local code; verify the UK plug is properly fused.
Spare Parts: Standard components such as water reservoir, gaskets, and milk hoses should be replaceable via parts provider.